The sound of vinyl can be significantly improved when unwanted resonances between the record and the platter can be reduced during playback. Therefore, the surfaces of the disc and platter must connect firmly.
Excessive clamper weight can induce higher noise levels when used with inexpensive turntables that have less massive main bearings. This will affect the sound negatively.
Instead of the desired closer contact between the vinyl and the turntable, the opposite is often achieved: due to the high weight in the middle of the plate, the record bows and the edge loses contact with the turntable.
The clamp it is a good solution for these cases, an accessory with a clamp mechanism around the central axis, which will hardly add weight but will keep the vinyl in the optimal position on the plate, being able to adjust the pressure depending on how deformed it is. the disc.
Characteristics:
The clamp it is ideal for small turntables with less powerful motors. For large turntables we recommend using the Record Puck clamp model weighing 800 grams.
8 other products in the same category:
