The AT-OC9XML dual moving coil stereo cartridge features a bare Microlinear stylus and boron cantilever, neodymium magnet and permendur yoke for increased magnetic energy and features threaded inserts in the cartridge body.
Microlinear diamond profile provides low registration and stylus wear.
- It incorporates a bare Microlinear stylus and a boron cantilever, which provides lower distortion and high transient response.
- A neodymium magnet and permendur yoke provide a dramatic increase in magnetic energy.
- Threaded inserts in the cartridge body allow the cartridge to be mounted to the headstock or integrated arm with just two screws - no nuts needed
- Aluminum body minimizes unwanted vibration for reduced resonance and superior audio reproduction
- Pure continuous cast oxygen-free copper (PCOCC) is used so that the coils achieve the purest signal possible
Characteristics:
- Frequency Response: 20 - 47,000 Hz
- Channel Separation: 27 dB (1 kHz)
- Vertical Tracking Angle: 20 degrees
- Vertical Tracking Force 1.8 to 2.2 g (standard 2.0 g)
- Needle Construction: Bare Square Shank
- Recommended Load Impedance Minimum 100 Ohms
- Coil Impedance: 12 Ohms (1 kHz)
- DC Resistance: 12 Ohms
- Coil Inductance: 25 µH (1 kHz)
- Output Voltage: 0.4 mV (at 1 kHz, 5 cm/sec)
- Output Channel Balance: 1.0 dB (1 kHz)
- Needle Shape: Microlinear
- Cantilever: 0.28 mm Ø bare boron
- Static Compliance: 20 x 10 – 6 cm / dyne
- Dynamic Compliance: 16 x 10 – 6 cm / dyne (100 Hz)
- Mounting: 1/2” center / Threaded holes
- Capsule Weight: 7.6 gr
- Dimensions: 17.3 (H) x 16.8 (W) x 25.7 (L) mm
- Accessories Included: 1 non-magnetic screwdriver; 1 brush; 2 washers; 4 pairs of mounting screws 5mm, 8mm, 10mm, 12mm; 1 plastic protector
- Body Material: Aluminum
- Needle Size: 2.2 x 0.12 mil
- Terminal Pins: Copper
- Wire Used for Coil: PCOCC (Ohno Continuous Casting Process Copper.)
