Wharfedale Evo 4.4 + CS + 4.1 + Evo 4 Stands

Center channel speaker

It is the simplest center channel speaker proposal in Wharfedale 's EVO4 range, defined by its creators as the dawn of a new standard of excellence in affordable Hi-Fi and which represents the logical evolution of the celebrated EVO Series, it uses a Versatile 2-way, 3-speaker bass-reflex setup. The EVO4.CS stands out not only for the refinements incorporated into its enclosure and the materials used in its construction, but, above all, for including an innovative tweeter based on the AMT 'Air Motion Transformer' operating principle. of Air Movement). As a result of the particularities of its design, the AMT transducer allows a larger volume of air to be displaced than a conventional dome tweeter from an extremely light diaphragm, resulting in very precise, agile reproduction with less distortion of high frequencies. of the spectrum. The reproduction of lower frequencies has also received great attention in the design of the EVO4.CS, as corroborated by the use of two 130 mm Kevlar interwoven fiber cone woofers, equipped with a characteristic dispersion modifier in the form of a projectile. This ensures an extremely smooth acoustic cut-off and thus further increases the ability to integrate with the AMT tweeter and the 50mm soft dome midrange driver to deliver precise and convincing reproduction. of movie dialogues. Another key aspect of the EVO4.CS is the care put into the design of the crossover filter, which has seen hundreds of hours of listening combined with exclusive computer-aided optimization technology developed specifically for Wharfedale .

Characteristics:

• 2-way/3-speaker bass-reflex monitor and exceptional quality/price ratio.
• Designed to reproduce the center channel in Home Theater systems.
• Two “midwoofers” with 130 mm intertwined Kevlar fiber cone.
• 30.6mm tweeter based on AMT 'Air Motion Transformer' technology.
• Frequency divider filter designed with exclusive software.
• Enclosure with internal reinforcements developed from scratch.
• Dual rear-emitting bass-reflex ports.
• Frequency response: 50 - 22,000 Hz, +/-3 dB.
• Sensitivity: 90 dB/W/m.
• Nominal impedance: 8 Ohm and minimum 4.4 Ohm.
• Power of the associated amplifier between 25 and 100W.
• Dimensions: 585 x 185 x 265 mm (W x H x D).
• Weight: 11.6kg.

WHARFEDALE EVO 4.1

It is the starting point of Wharfedale 's EVO4 range, defined by its creators as the dawn of a new standard of excellence in affordable Hi-Fi and representing the logical evolution of the celebrated EVO Series. With a 2-way, 2-speaker bass-reflex configuration, the EVO4.1 stands out not only for the refinements incorporated into its enclosure and the materials used in its construction, but, above all, for including an innovative tweeter based on on the AMT 'Air Motion Transformer' operating principle). As a result of the particularities of its design, the AMT transducer allows a larger volume of air to be displaced than a conventional dome tweeter from an extremely light diaphragm, resulting in very precise, agile reproduction with less distortion of high frequencies. of the spectrum The reproduction of mid and low frequencies has also received great attention in the design of the EVO4.1, as corroborated by the use of two 130 mm Kevlar intertwined fiber cone woofers, equipped with a characteristic projectile-shaped scatter modifier. Thanks to this, an extremely smooth acoustic cut-off is ensured and, therefore, the integration capacity with the AMT tweeter is further increased. Another fundamental aspect of the EVO4.1 is the care put into the design of the crossover filter, the development of which has involved hundreds of hours of listening combined with exclusive computer-assisted optimization technology developed specifically for Wharfedale .

Characteristics:

• 2-way/2-speaker bass-reflex monitor and exceptional quality/price ratio.
• Great versatility High Fidelity/Home Cinema.
• Mid/bass speaker with 130 mm intertwined Kevlar fiber cone.
• 30.6mm tweeter based on AMT 'Air Motion Transformer' technology.
• Frequency divider filter designed with exclusive software.
• Enclosure with internal reinforcements developed from scratch.
• Bottom-emitting bass-reflex port for easy installation.
• Frequency response: 64 - 22,000 Hz, +/-3 dB.
• Sensitivity: 87 dB/W/m.
• Nominal impedance: 8 Ohm and minimum 3.5 Ohm.
• Power of the associated amplifier between 25 and 100W.
• Dimensions: 210 x 335 x 285 mm (W x H x D).
• Weight: 7.8kg.

Price per pair.

Option of specific floor stands for this speaker model: EVO4 Stands.

Speaker Floor Stands

Wharfedale EVO4 stands are designed specifically for the EVO4 series of stand (or bookshelf) mount speakers. With a height of 616 mm, the metal structure of the EVO4 Stands is laser cut from high quality stainless steel. This precision design means the stand is sold in height and stability is optimized. This considered engineering reduces speaker cabinet vibrations and resonance by effectively isolating the speaker from the floor and its surroundings. The assured result is greatly improved speaker performance. Not only the perfect match for the EVO4 series, the EVO4 stands are ideal for any smaller speaker thanks to the overall design that complements any speaker, in any room, aesthetically and acoustically.

Characteristics:

• Ideal complement for bookshelf speakers.
• Specially designed for Wharfedale EVO4.1 and EVO4.2.
• High quality stainless steel construction.
• Adjustable foot spikes for added isolation.
• Integrated cable management system.
• Easy assembly.
• Satin textured finishes.

Price per pair.

Speakers not included.