CA1800DSP is one of the best sounding high power amplifiers on the market. It is a powerful 3-channel power amplifier with integrated DSP, designed for fixed installations.
Delivers up to 3x1000W into 4 ohms or 3x600 watts into 8 ohms, all channels driven and allows third party control. It is also capable of delivering 600 watts at 70V/100V per channel and for added flexibility, CA1800DSP can operate in high impedance mode on one or more channels, with the other channel(s) operating in low impedance.
CA1800DSP provides a complete set of DSP functions with presets for all Cornered speakers. Setup is easily done via a USB or Ethernet connection. It includes a high-efficiency switching power supply and three Class D output stages with ultra-low distortion, high efficiency, and a full set of circuit protections. An effective heat dissipation system and overheating protection ensure uncompromising reliability.
The advanced power supply includes power factor correction and delivers constant, regulated power worldwide.
The CA1800DSP is capable of sophisticated speaker processing with its high-performance 24-bit AD/DA converters. It has 12 equalizers on each input channel and 5 equalizers on each output channel. Each band can be switched to Bell, Lo/Hi-Shelving with variable Q. High-pass and low-pass filters are also available on each channel, from 6 dB/octave to 24 dB/octave Butterworth, Bessel, and Linkwitz-Riley.
The integrated matrix allows signals from any input to any output. It has triggers and the RCA inputs can be linked. Volume control and up to 56 preloaded settings can be accessed directly from the front panel.
With very high output, excellent sound quality and adjustments for all Cornered speakers, the CA1800DSP is a perfect fit for large Cornered installations.
Characteristics:
- 2x2 matrix
- Premium 48kHz/24-bit DSP
- Automated room equalizer
- Dynamic volume
- Limiter
- RMS compressor
- Delay in time or distance
- White/pink noise generator
- Acoustic masking
- Auto on/off
- USB, RJ45 or Wi-Fi connection to configure, monitor and control the system using remote PC software (included)
- Simultaneous control of up to 32 units via PC software
- Presets for all Cornered speakers
- Connection for remote volume control (GPIO)
- Number of channels: 2
- Maximum output power (4 and 8 ohms) 2x140 W
- Maximum output power (bridged) 1x280 W
- Maximum output power (100V) 1x280W
- Output Circuits: Class D
- THD+N:
- Signal to noise ratio: >105 dB
- Frequency response 20-20 kHz±0.1 dB
- Power Supply: Universal
- Operating range: 110-240V Mains
- Stand-By 0.25 watts
- Maximum input/output level: +12 dB
- Connections: Phoenix with link at the entrance
- Dimensions: 1U half rack space (HxWxD): 44x220x234mm
- Weight: 2.54kg
