This VM95 series cartridge with 0.3 x 0.7 mil elliptical stylus fits half-inch mount turntables.
The special cartridge coil design offers a powerful 4.0 mV output level. It also offers excellent channel separation and low distortion for exceptional tonal quality.
The durable, low-resonance housing includes threaded inserts that allow the cartridge to be mounted to the headstock with just two screws, no nuts required. And since the entire VM95 series shares the same body, the stylus can be replaced with any of the six AT-VMN95 interchangeable replacement styli.
Characteristics:
- Frequency response: 20 - 22,000 Hz
- Channel separation: 20 dB (1 kHz)
- Vertical tracking angle: 23°
- Vertical tracking force: 1.8 to 2.2g (2.0g standard)
- Stylus Construction: Bonded Round Stem
- Recommended load impedance: 47,000 O
- Coil impedance: 3.3 kO (1 kHz)
- DC resistance: 485 O
- Coil inductance: 550 mH (1 kHz)
- Output voltage: 4.0 mV (@ 1 kHz, 5 cm/sec)
- Output channel balance: 2.0 dB (1 kHz)
- Pencil shape: elliptical.
- Aluminum tube: cantilever
- Static compliance: 17 x 10 – 6 cm / dyne
- Dynamic compliance: 7 x 10 – 6 cm / dyne (100 Hz)
- Mounting on 1/2” centers
- Cartridge weight: 6.1g
- Dimensions: 17.2 x 18.9 x 28.3 (height x width x depth mm)
- Accessories included: Two 11mm installation screws;
- Recommended load capacitance: 100-200 pF
- Stylus size 0.3 x 0.7 mil
- Type VM Stereo Double Magnet
- Cable used for TP Copper coil
8 other products in the same category: