AT-VM95EN incorporates a naked elliptical diamond. The construction of the stylus, consisting of a piece of diamond with a round shank inserted into the cantilever, creates a transmission system that is lightweight and stiffer than a diamond tip glued into a round titanium shank, as is the case with AT- VM95E.
Furthermore, the use of a bare diamond implies a substantial difference in price, although the quality of the reproduction will be immediately evident, specifically in the fidelity in the high frequencies and in the quality of the transient response.
Features:
- Frequency Response: 20 - 23,000 Hz
- Channel Separation: 22 dB (1 kHz)
- Vertical Tracking Angle: 23°
- Vertical Tracking Force: 1.8 to 2.2g (2.0g standard)
- Needle Construction: Bare Round Shank
- Recommended Load Impedance: 47,000 O
- Coil Impedance: 3.3 kO (1 kHz)
- DC resistance: 485 O
- Coil Inductance: 550 mH (1 kHz)
- Output Voltage: 3.5 mV (@ 1 kHz, 5 cm/sec)
- Output Channel Balance: 2.0 dB (1 kHz)
- Needle Shape: Elliptical
- Cantilever: Aluminum tube
- Static Compliance: 20 x 10 – 6 cm / dyne
- Dynamic Compliance: 7 x 10 – 6 cm / dyne (100 Hz)
- Mounting: 1/2" between centers
- Capsule Weight: 6.1gr
- Dimensions: 17.2 x 18.9 x 28.3 (H x W x D in mm)
- Accessories Included: Two 11 mm installation screws; Two 8 mm installation screws; Two washers, Non-magnetic screwdriver.
- Recommended Load Capacitance: 100-200 pF
- Replacement Needle: AT-VMN95EN
- Needle Size: 0.3 x 0.7 mil
- Type: VM Stereo Double Magnet
- Cable Used for Coil: TP Copper
