- -15%
The DC BLOCK is a very compact and attractive product that, as its name suggests, has been specifically designed to block the input of direct current from the mains into all types of audio electronics. The idea behind this versatile accessory is the proven fact that, as a general rule, the alternating signal present in the electrical network is subject to various types of interference and non-linear loads that distort it. In particular, asymmetric loads will cause drifts in the aforementioned alternating signal, the result being what is known as “direct current in the alternating electrical signal.” The magnitude of said direct current is small, of the order of 500 mV, but it must be known that a small amount of direct current is enough to saturate a modern high flux toroidal transformer, which will lead to a reduction in its efficiency and increased mechanical vibrations. This is where the DC BLOCK comes into play, combining a simple connection with an intelligent design to instantly eliminate the direct current present in the network signal, to which it adds additional conditioning of the latter and signal filtering. radio frequency, both processes that contribute to optimizing the operation of any audio component.
Characteristics:
- DC blocker present in the network signal.
- Provides extra conditioning of the network signal and radio frequency filtering.
- Exceptional quality/price ratio.
- Reduces hum and mechanical vibrations of transformers.
- Improves the performance of all types of audio components.
- Compatible with 100-240 V/50-60 Hz mains signals.
- Maximum peak load of 600 VA.
- Compatible with 2x150 W RMS or 1x300 W RMS power amplifiers.
- Dimensions: 113x59x140 mm (WxHxD).
- Weight: 0.7 kg.
8 other products in the same category: