EAT E-Glo S

2.999 €

VAT included

phono preamp

Get register and you will earn 2999 points

Your cart will total 2999 points that can be converted into a voucher of 30 €.

Guaranteed minimum price

E-glo S is a hybrid phono preamplifier. To obtain higher gain and lower noise, we use in the first stage a combination of ECC83 triode tubes and low-noise J-FET transistors. The RIAA curve is fully passive equalized and divided into two steps, allowing perfect impedance matching between the gain stage and the equalization block. It has a massive aluminum chassis and offers multiple possibilities to adjust impedance, capacity and gain. It has a subsonic filter with a soft effect that does not affect the audible frequencies unpleasantly. A very important part is the advanced power supply that uses anode voltage regulation and well-filtered voltage. Filtering is in three steps, this results in a perfect signal-to-noise ratio and a seamless musical experience.

Characteristics:

Input impedance: MC 10,25,50,75,100,1000 Ohm Load capacity 50,100,150,200,270,320,420pF
Output impedance: 100 ohms
Load capacity: 50,100,150,200,270,320,420 pF
MM gain 45 dB
MC gain 45,50,55,65,70 dB
RIAA standard between 0.5 dB / 20Hz – 20kHz
Subsonic filter at 18 dB / Octave
Stereo RCA audio input and output
Internal power supply DC18V/1
Dimensions 435 × 90 × 270 mm